欢迎光临悍将起重!主要生产电磁吸盘、永磁吸盘、永磁起重器,提供生产销售安装售后一站式服务。

联系方式
地址:中国河北省保定市清苑区东吕工业园区
电话:0000
固话:00000
邮箱:00000qq.com
联系人:00000
永磁起重器资讯

您现在的位置:主页 > 起重资讯 > 永磁起重器资讯 >

电磁吸盘维护保养和安全须知

发布时间:2018-03-22 16:20编辑:admin浏览次数:

    电磁吸盘不要剧烈撞击,以免破坏精度,在闲置时,应擦净,涂防锈油。吸盘外壳接地,使用说明矩形电磁吸盘两侧有吊装螺孔,在安装时拧入T形螺钉即可吊装,用T形块和螺钉固定在工作台上,接通机床上的直流电源和地线,然后将吸盘上平面精磨一次,以保证上平面对底面的平行度。
    在吸附工件时,只要搭接相邻的两个磁极,即可获得足够的定位吸力,即可进行磨削加工。通过机床按钮,可实现工件的通磁和退磁。
     Maintenance and safety of sucker without serious bump, so as not to damage the accuracy in the idle time, should be clean, antirust oil.Sucker shell should be grounded, to avoid wounding leakageThe use of rectangular electromagnetic sucker on both sides of a lifting screw, when installing the T screw can be screwed into the lifting T shape is fixed on the working table block and screw, DC power supply and switch on the machine on the ground, and then the sucker flat grinding time, to ensure the plane on the bottom surface of flat line.When the workpiece is absorbed, as long as the two adjacent magnetic poles are overlapped, enough positioning suction can be obtained, and the grinding process can be carried out.Through the machine button, the workpiece can be achieved through magnetization and demagnetization.
相关产品
相关资讯
XML 地图 | Sitemap 地图